This chaos terrain set is ideal for many tabletop wargaming terrain gaming settings. Suitable for fantasy and scifi tabletops.

Print time 1-3 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post God Skull and Rocky Outcrops appeared first on Right3D.

Highly modular no magnets required glue is optional in most places.

190mm x 190mm x 355mm ( length x width x height ) approximately

Print time 2-4 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Sorcerers Tower appeared first on Right3D.

The Chaos citadel terrain set is ideal for many tabletop gaming settings. suitable for fantasy and sci fi tabletops.

Comes unassembled, some assembly required.

Print time 2-3 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Ruined Watch Tower Wall appeared first on Right3D.

Made of modular sections held by a glue less locking mechanism. Magnets optional. Easily assembled and disassembled for transport. Sturdy and durable.

The Chaos citadel terrain set is ideal for many tabletop gaming settings. suitable for fantasy and sci fi tabletops.

Comes unassembled, some assembly required.

Print time 2-3 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Ruined Fortress Gate appeared first on Right3D.

Made of modular sections held by a glue less locking mechanism. Magnets optional. Easily assembled and disassembled for transport. Sturdy and durable.

The Chaos citadel terrain set is ideal for many tabletop gaming settings. suitable for fantasy and sci fi tabletops.

Comes unassembled, some assembly required.

Print time 2-4 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Big Ruined Fortress Corner Wall appeared first on Right3D.

Made of modular sections held by a glue less locking mechanism. Magnets optional. Easily assembled and disassembled for transport. Sturdy and durable.

The Chaos citadel terrain set is ideal for many tabletop gaming settings. suitable for fantasy and sci fi tabletops.

Comes unassembled, some assembly required.

Print time 2-3 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Small Ruined Fortress Corner Wall appeared first on Right3D.

The Chaos citadel terrain set is ideal for many tabletop gaming settings. suitable for fantasy or scifi tabletops.

Comes unassembled, assembly required.

Print time 1-3 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Chaos Warp Gate appeared first on Right3D.

The Chaos citadel terrain set is ideal for many tabletop gaming settings. Highly modular, with custom options to give it a fantasy or scifi feel.

Scifi option replaces some walls with for futuristic themed exteriors and inserts.

The outer height of the walls is 4.5 inches, the height to the inner walkways is 3.5 inches. The walkways are 40mm wide. Its connection system is a rock solid push fit variation. Optional magnets can be fit to each part to make sure it's as tight as possible. No magnets provided.

Print time 3-6 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Chaos Stronghold appeared first on Right3D.

The Chaos citadel terrain set is ideal for many tabletop gaming settings. Highly modular, with a working gates and custom options to give it a fantasy or scifi feel.

The outer height of the walls is 4.5 inches, the height to the inner walkways is 3.5 inches. The walkways are 40mm wide. Its connection system is a rock solid push fit variation. Optional magnets can be fit to each part to make sure it's as tight as possible. No magnets provided.

Print time 3-6 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Chaos Fortress appeared first on Right3D.

The Chaos citadel terrain set is ideal for many tabletop gaming settings. Highly modular, with a working gates and custom options.

The outer height of the walls is 4.5 inches, the height to the inner walkways is 3.5 inches. The walkways are 40mm wide. Its connection system is a rock solid push fit variation. Optional magnets can be fit to each part to make sure it's as tight as possible. No magnets provided.

Print time 3-6 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Mutated Chaos Fortress appeared first on Right3D.