Individual parts can be purchased in replacement or addition.

Industrial Compound

• 3x 3x3 buildings
• 2x 3x6 buildings
• 3x 3x3x6 building
• 1x 6x6 building
• 5x walls
• 2x ladders
• 1 staircase
• Scatter barrels and terminals
• 12x Parapets
• 1x 3" Vat

Industrial Outpost

• 3x 3x3 buildings
• 1x 3x6 buildings
• 1x 6x6 building
• 4x walls
• 2x short Walls
• 1x ladders
• 2x heavy crates
• 5x Parapets

This product is not affiliated with, sponsored by, or endorsed by Games Workshop. This is an independent item designed for any applicable tabletop purpose. No association is stated or inferred.

Print time 3-4 days

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Compatible with popular Sci-fi table top war games.

Any questions don't hesitate to inquire.

Designed by Vanguard Terrain & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Industrial Enclave Skirmish Terrain 28mm - 32mm appeared first on Right3D.

As of 12th June's community post it became known that certain "Mission Layouts" required the terrain area's to be flipped to be accurate. As our layouts are textured only on one side they will not look as currently photographed in these few cases. We apologise for any confusion.

**IMPORTANT UPDATE**

A complete set of single sided terrain area templates compatible to the specifications of the 11th Edition of the Warhammer 40k game system.

Each terrain area template set includes: 16 pieces

• Four large rectangles – 7” x 11.5”
• Two large right-angle triangles – 8” x 11.5”
• Four medium rectangles – 6” x 4”
• Two long lines – 10” x 2.5”
• Four short lines – 6” x 2”

3mm thickness in all tiles. 

Superglue required to attach 8” x 11.5” terrain bumps only.

This product is not affiliated with, sponsored by, or endorsed by Games Workshop. This is an independent item designed to be compatible to the specifications set by Games workshop for the Warhammer 40k game system. No association to any held trademarks is stated or inferred.

Print time 2-3 days

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Compatible with popular Sci-fi table top war games.

Any questions don't hesitate to inquire.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post 11th Edition Warhammer 40k Compatible 1 Sided Terrain Area appeared first on Right3D.

Print time 3-4 days

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Compatible with popular Sci-fi table top war games.

Any questions don't hesitate to inquire.

Designed by The Board Hoard ( formally cy-Tilez ) & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post HabBlox EPIC Modular SciFi Urban City Bundle appeared first on Right3D.

Print time 3-4 days

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Compatible with popular Sci-fi table top war games.

Any questions don't hesitate to inquire.

Designed by The Board Hoard ( formally cy-Tilez ) & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post GothBlox EPIC Modular Imperial City Bundle appeared first on Right3D.

Print time 2-3 days

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Compatible with popular Sci-fi table top war games.

Any questions don't hesitate to inquire.

Designed by War Scenery & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Greater Good EPIC Bundle appeared first on Right3D.

Print time 2-3 days

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Compatible with popular Sci-fi table top war games.

Any questions don't hesitate to inquire.

Designed by War Scenery & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Imperial Guard EPIC Bundle appeared first on Right3D.

Upgraded version 2, resized and improved with the new clip and peg connector system.

Print time 2-3 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Compatible with any popular Sci-fi table top war games.

Any questions don't hesitate to inquire.

Designed by War Scenery & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Tau Tent of the Master appeared first on Right3D.

This chaos terrain set is ideal for many tabletop wargaming terrain gaming settings. Suitable for fantasy and scifi tabletops.

Print time 1-3 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post God Skull and Rocky Outcrops appeared first on Right3D.

Highly modular like all parts designed by Dark Fantastic Mills but in this listing we provided it with the single Beacon Tower or the full Blood Bailey with the Viewing Tower and the Dragon Perch.

Ruined Blood Bailey = 245mm x 245mm x 270mm ( length x width x height ) approximated

Print time 3-6 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Chaos Ruined Blood Bailey appeared first on Right3D.

Highly modular no magnets required glue is optional in most places.

190mm x 190mm x 355mm ( length x width x height ) approximately

Print time 2-4 days.

Each set is supplied unpainted.
No miniatures are included.
Printed in Grey PLA.
Some sanding and light clean up may be required.
No glue provided.

Any questions don't hesitate to inquire.

Designed by Dark Fantastic Mills & printed under license.

At Right3D we take pride in our prints being the best quality they can be. As such all of our printers are restrained to speeds that create no unavoidable artefacts or defects in the print. This means we might be a bit slower and more expensive to produce our prints than some of our competitors but our prints look a lot better. We hope you see value in our approach and our prints. However 3D printing is still a imperfect technology and some imperfections are impossible to eradicate completely.

We ask that all customers please leave at least the advertised print time in there dispatch expectations to give us time to make sure your print is perfect.

The post Sorcerers Tower appeared first on Right3D.